Position Bathmate Valve Latch1
The Bathmate Valve consists of two parts, the latch and the clear valve cap. To use Bathmate under the shower, you have to push the latch to either the top or down position to close the valve. The central position opens up the valve. If you’re preparing to use Bathmate in your bathtub, you may simply leave the latch to the central position at all times.
Insert Hydromax Comfort Pad2
One of the improved features of the Bathmate Hydromax to the 1st generation Bathmate Hercules is that the Hydromax series come with the newly designed comfort pad. This is a very soft rubber pad that’s going to serve as a cushion when pumping and maintaining the negative pressure. Align the comfort pad by the rectangular marking on both the comfort pad and the gaiter base and insert it in firmly.
Show or Hide Measuring Guide3
Each Bathmate Hydromax comes with a measuring guide printed on one side of the Bathmate. To Show or Hide the measuring guide, hold on to the body of Bathmate Hydromax in one hand and the Bathmate Hydromax pumping system in another then twist with moderate force. The body of Bathmate should rotate to show or hide the measuring guide.
Warm Up For 5 Minutes4
Same to all working out and training, warming up the body helps to prevent any injury and makes the session more effective. Before starting to use Bathmate, warm up you entire body by standing under a warm shower or sitting inside a bathtub filled with warm water for about 5 minutes. This helps to loosen up your muscles, increases blood flow and will help to maximise your Bathmate training effectiveness.
Fill Bathmate With Warm Water5
Once you get yourself ready to use Bathmate, fill up Bathmate Hydromax with warm water. You should fill up the Bathmate to the fullest. Now insert your penis in to Bathmate Hydromax and be careful not to spill too much water during this process. Using warm water instead of cold or room temperature water to make Bathmate training more comfortable. The depressed side of the rubber gaiter should be facing towards the ground. This feature is to minimise pressure on your scrotum.
Pump To Create Pressure6
Once establishing a good seal with the body, pull Bathmate Hydromax towards your body with some force. New Bathmate may be slightly harder to pump and can be broken in by pumping Bathmate using your hands. While you are pumping, water inside Bathmate Hydromax will be expelled out of the pump. The volume of the water pumped out will be replaced by the penis erection. Control the pressure and make sure you are not over pumping. Never pump your Bathmate Hydromax beyond discomfort.
Re-pump Bathmate to Maintain Presure7
Bathmate Hydromax and other series of Bathmate products are designed to release pressure bit by bit. This is to avoid over suction damage caused by prolonged pressure. When you feel that the pressure has been lost too much and is not able to maintain an erection well, re-pump your Bathmate Hydromax substantially to create negative pressure.
Release Pressure When Done8
15 min per day of Bathmate training is what we recommend. Over training is not advisable. Remember, enough rest is the key to allow grows. When your session is complete, press the clear valve cap inwards to release the pressure. You can now take Bathmate Hydromax down. Clean it up Bathmate Hydromax with running water, air dry and store it at a less humid location.
How to use Bathmate Hercules (Animation)
This is an animation Bathmate Hercules tutorial.